All machines need maintenance during use, not to keep the appearance of the machine bright, but mainly to protect the parts and make them work normally. The maintenance of the gluing machine can not only make the machine work normally for a long time, but also effectively extend the service life of the machine.

The common daily maintenance methods are mainly divided into two types: the curing of the glue applicator and the curing of the automatic spraying line. The maintenance of the adhesive should be cleaned after using the nozzle. Otherwise, it is easy to block, affecting the next use, and the air supply system should also be cleaned frequently. Otherwise, the adhesion of glue will be reduced if the dust enters.

If it is not used for a long time, clean the glue in the plastic tank and pipe, and clean the machine once. When replacing the adhesive manually, the machine should also be cleaned to avoid affecting the spraying effect. In addition, the maintenance of the assembly line needs to clean the greasy dirt on the chain of the transport network at any time and add butter. For the control system, the correct operation must strictly follow the friction instructions, and it cannot be disassembled at will to avoid damage to the control system.

In a word, it is necessary to clean the machine after and before use. Glue is easy to stick to dust, so if you want to use it well, you should clean the machine without impurities, so that the use effect will not be affected.